xsane.lha driver/misc - Comments

DaveyW (118.92.72.233) @ 03 Sep 2013, 02:15.04

Tue, 03 Sep 2013 02:15:04 +0200

By: DaveyW (118.92.72.233)

My Epson Perfection 1250 is now recognised and can generate a preview. The problem is the colours are all wrong.

stanglnator (86.32.151.140) @ 12 Jul 2013, 05:04.06

Fri, 12 Jul 2013 17:04:06 +0200

By: stanglnator (86.32.151.140)

@CygnusED 
 
My System: X1000 OS4.1.6  and Epson1260  Latest AmiCygnix and Libusb.

CygnusEd (82.115.114.199) @ 11 Jul 2013, 11:07.08

Thu, 11 Jul 2013 23:07:08 +0200

By: CygnusEd (82.115.114.199)

@stanglnator 
 
So the "plustek" backend does not work for you? This backend was successfully tested with some other scanners (LiDE 30, Canon MP620). I have my doubts, that it is a problem of Sane/Xsane. What is your hardware configuration?

stanglnator (86.32.151.140) @ 11 Jul 2013, 02:56.43

Thu, 11 Jul 2013 14:56:43 +0200

By: stanglnator (86.32.151.140)

Same freeze with my Epson1260Photo. 
 
1 Try Xsane or a other Backend see my Scanner. 
Try a Preview -> Freeze 
2. Try only the Two Virtual Devices.

DaveyW (118.92.137.120) @ 02 Dec 2012, 02:55.04

Sun, 02 Dec 2012 02:55:04 +0100

By: DaveyW (118.92.137.120)

Got hold of an Epson Perfection 1250. Seems to recognise it OK, but when I try to scan it seems to freeze.

CygnusEd (82.115.114.199) @ 28 Nov 2012, 07:14.31

Wed, 28 Nov 2012 19:14:31 +0100

By: CygnusEd (82.115.114.199)

This is the correct library. 
 
Had a look at the sane homepage. The scanner is not supported, even the original Linux backend from HP (hpaio) does not support this model :-(

DaveyW (118.92.137.120) @ 28 Nov 2012, 07:57.52

Wed, 28 Nov 2012 07:57:52 +0100

By: DaveyW (118.92.137.120)

@CygnusEd 
 
libusb.library v 0.1.12 20,072 bytes. 
 
Thanks. I guess Printer/Scanners are not compatible, only pure scanners?

CygnusEd (82.115.114.199) @ 25 Nov 2012, 05:06.39

Sun, 25 Nov 2012 17:06:39 +0100

By: CygnusEd (82.115.114.199)

@DaveyW 
 
Which version of libusb.library do you have installed? You need version 0.1.12. 
 
It is not enough that it is listed under "Printer". It must be listed under "Vendor Specific" as a scanner device.

DaveyW (118.93.18.196) @ 25 Nov 2012, 12:55.53

Sun, 25 Nov 2012 00:55:53 +0100

By: DaveyW (118.93.18.196)

Thanks for the reply jabirulo. 
I have libUSB.library installed. 
USB stack is certainly running under AOS. I guess its running under AmiCygnix as I can access flash drives. 
I can see the printer listed under USBInspector "DeskJet 1050 J410 series" under Printer and Vendor Specific

jabirulo (83.40.213.207) @ 24 Nov 2012, 12:31.57

Sat, 24 Nov 2012 12:31:57 +0100

By: jabirulo (83.40.213.207)

@DaveyW 
Did you check if you have in LIBS: that library installed? 
libusb.library                20072 bytes 
version libusb.library file full 
libusb.library 0.1.12 (27.May.2008) 
 
And the USB stack started? ;-) 
Can you "see" under AOS4.1 the scanner (USBInspector)?

jabirulo (83.40.213.207) @ 24 Nov 2012, 12:29.00

Sat, 24 Nov 2012 12:29:00 +0100

By: jabirulo (83.40.213.207)

Hi, too difficult to add support fot SCSI scanners, I have a HP Scanjet4p :-)

DaveyW (118.93.179.223) @ 29 Sep 2012, 02:15.40

Sat, 29 Sep 2012 02:15:40 +0200

By: DaveyW (118.93.179.223)

Does anyone know how to get this to work? I have a HP 1050 scanner. When I run xsane, it says "Scanning for devices" but only finds 2 virtual devices. I have installed this package and the frontends.